Home / Builders / CMC Metal Fabrication
Insuring CMC Metal Fabrication: cover and premium
sailing boats and sailing yachts · several countries
CMC Metal Fabrication builds sailing boats and sailing yachts in several countries. NAMMERT insures a CMC Metal Fabrication regardless of year built or where you bought it, liability, hull, legal expenses and personal accident cover from one house, taken out online in five minutes.
At a glance
Origin
several countries
Class
sailing boats and sailing yachts
Typical sizes
Premium from
from €39 a year for liability
Worth knowing
CMC Metal Fabrication; cover, cost and conditions
The only model range recorded from CMC Metal Fabrication is the sailing yacht Steelmaid 45 with model years from 1989 to 1996. For a yacht of this class third-party liability comes first: a limit of indemnity of 10 to 50 million euros, graded across the tariff levels Basis, Basis-Plus and Premium, depending on the scope chosen.
How high the sum turns out is decided by the tariff level and not by the yard. The premium itself is based on type of boat, value, year of construction, sail area and cruising range. Up to a sum insured of 2.5 million euros you can take out the policy online, above that an individual assessment of the specific boat follows.
Exactly one model range from this yard is recorded in our portfolio. No policy fails because of the number of models, since small series and home builds are insurable too. For full hull cover we agree an agreed value, in the Premium tariff with no age limit and with indemnity with no deduction for depreciation ("new for old").
Questions and answers
Frequent questions
Which limit of indemnity can be chosen for a sailing yacht?
For CMC Metal Fabrication: Third-party liability ranges from a limit of indemnity of 10 to 50
million euros.
The amount depends on the tariff level Basis,
Basis-Plus or Premium and not on the yard or the model.
From which sum insured does the online policy end?
For CMC Metal Fabrication: Up to a sum insured of 2.5 million euros the policy is taken out online.
Above that we examine each case individually so that cover and sum match the yacht and the
cruising range.
The cover that fits
sailing yacht insurance
Tariffs, cover and FAQ for sailing yacht insurance in detail.
Third-party liability
The foundation for a boat from CMC Metal Fabrication: damage to third parties, worldwide,
from €39 a year for liability.
Hull cover
Partial or full hull cover for a CMC Metal Fabrication,
at replacement value with an agreed fixed value.
For the whole class of boat
For CMC Metal Fabrication: What matters for sailing boats and sailing yachts is the same across
every brand; engine output, how a claim is settled, cruising range and theft protection.
The class page lists every point and every brand in this class, CMC Metal Fabrication included.
Insuring sailing boats and sailing yachts, every brand and every condition
Other builders in this class
Nautical information What counts before you cast off, papers, equipment, waters
Licence
A powerboat licence (inland or coastal) is required from 15 hp (11.03 kW).
Registration
Registration from 3 hp; for trips abroad carry the boat certificate or flag document.
Waters
Inland, coastal and abroad; plan fairways, bridge clearances, draught and tides.
Equipment
Lifesaving gear, fire extinguisher, anchor, signalling equipment and correct navigation lights.
Cruising range
The agreed cruising range is stated in the policy and can be extended at any time.
Weather
Check wind force in Beaufort and wind direction before casting off, and allow for gusts.
General guidance, not a complete account;
what governs are the rules of the waters you are on and the manual of your CMC Metal Fabrication.
Current wind force and direction for your waters are shown on the Home.
Series by CMC Metal Fabrication, build years and cover
Steelmaid 45 is a sailing yacht from CMC Metal Fabrication, built from 1989 to 1996.
For the Steelmaid 45 by CMC Metal Fabrication series there is no list price left.
That is why we work with an agreed value: you state the figure, we agree it,
and in a total loss exactly that amount is paid, with no deduction for wear.
For the Steelmaid 45 by CMC Metal Fabrication series:
On sailing yachts the rig and the underwater hull are the expensive parts:
a dismasting quickly costs a quarter of the boat,
and osmosis counts as wear and is covered by no hull policy.
What does a used CMC Metal Fabrication cost?
We hold today’s price ranges by year for 1 models by CMC Metal Fabrication.
The table shows what boats in average condition are worth,
from the oldest to the youngest year on record.
Choose your exact model, year and condition in the calculator.
| Model | Years built | Range today |
|---|---|---|
| Steelmaid 45 | 1992 to 1993 | €105,200 to €137,500 |
Estimate from our boat records, October 2026.
Not a survey.
CMC Metal Fabrication insured in five minutes.
Boat type, year built, length and value of your CMC Metal Fabrication are all we need.
Work out the premium online or call us: +49 3375 29 12 77.
